Looking for:

What does zoom error code 3038 mean – none:.Repair Zoom Error Code 3038, 103033, 1142 when Becoming a member of Video Conferences

Click here to ENTER


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

What do I need to do? May I share my link to join with non-HBS alumni? How do I use the Zoom features during the event? How can I watch a recording or access slides? May I share the recording or other materials with non-HBS alumni? Yes, except when HBS login is required for access. Class containing elevation sources. Base type for symbols used to display a graphic or a feature. Implements the anchor of a symbol layer, including placement mode and x and y anchor values. Symbol layers are used to build Multilayer symbols.

A list model storing a list of symbol layers available in a multi-layer symbol. A list model storing a list of symbols. Symbol properties that change how symbols behave when attached to a renderer. Creates a new symbol style object using the registered style name of the Esri web style on the portal.

Search parameters used to search for symbols in a SymbolStyle. A search result object returned by symbol style. A list model storing a list of SymbolStyleSearchResult. Information about the capabilities supported by a sync-enabled service. A job returned by the GeodatabaseSyncTask::syncGeodatabase method. Options defining how to sync edits for a specific layer or table when creating a sync-enabled mobile geodatabase.

Result of a sync performed with GeodatabaseSyncTask. An object that describes a GeodatabaseFeatureTable to be created. Sublayer source that is the result of a join operation between two sublayer sources. Sublayer source that is a table, a feature class, or a raster that resides in a registered workspace either a folder or geodatabase. Information about the state of a running task with cancel support. Represents a pop-up element of type text that is displayed in a pop-up for a geoelement.

Used to display text at points on a layer. A local cache of pre-rendered map tiles that can be used to create a layer. Describes a map tile cache. A key used to identify specific tiles in a tile cache or service. A pure virtual interface implemented by classes that support time. Represents a span of time between a start time and end time. Time zone information for a time-aware layer. Defines a time offset or interval for time related classes. Information about remaining distance on a route.

Information about tracking progress passed and remaining geometries, remaining time and distance. Defines route tracking current status data. Allows discovery and management of the transformations used to convert coordinates between different datums. A transformation matrix consisting of a translation vector and a rotation quaternion. A transformation matrix camera controller that supports camera navigation by using TransformationMatrix.

A transportation network dataset. Defines how a pedestrian, car, truck or other mode of transportation moves through the network. A unique value definition for use with a unique value renderer. A list model storing a list of unique values available in a unique value renderer.

A renderer that displays different symbols based on unique values in the feature attributes. Base class for classes that represent a unit of measurement. An instance of this class represents a layer whose type could not be determined. An instance of this class represents a layer type that is not currently supported. A utility network asset group. The second-level categorization of a UtilityNetworkSource. A container class storing a list of UtilityAssetTypes. A connectivity, containment, or structural attachment association.

A category used to define a characteristic of an asset in a network. A condition evaluating whether a particular UtilityCategory exists on a feature in the trace. A domain network inside a utility network. An entity in a utility network that corresponds to a Feature. A trace result set comprised of a collection of UtilityElement objects. A trace result set comprised of a collection of UtilityTraceFunctionOutput objects. The trace result comprised of a set of Geometry objects representing the network elements identified by the trace.

A set of predefined trace options that can be used by UtilityTraceParameters to simplify configuring and running a trace operation. The query parameters to use when searching for applicable named trace configuration objects. A filter set on UtilityTraceFilter::nearestNeighbor to return the next N features from the starting point. A utility network.

A network attribute in a utility network. A condition evaluating the value of a UtilityNetworkAttribute on nodes in the network, either to another UtilityNetworkAttribute or to a specific value. The metadata of a utility network. A container class storing a list of UtilityNetwork.

A network source in a utility network. Propagator objects allow a subset of UtilityNetworkAttribute values to propagate through a network while executing a trace. A container class storing a list of UtilityPropagators.

A single terminal on a junction feature. A utility network terminal configuration. The set of flow paths between terminals for a given device configuration. Specifies a flow path between two UtilityTerminal objects. A logical level within a network. A related group of UtilityTier objects. Combines two sub-expressions together using a logical AND operator.

The base class for a utility network traversability condition. A trace condition that depends on the schema information in the Utility Network, such as the existence of a UtilityCategory on a node, or the value of a UtilityNetworkAttribute. The set of utility network parameters that define elements of a trace or of a subnetwork. A mechanism to stop tracing when returning results. UtilityTraceFilter objects do not stop traversability to the controller.

A function for computing values during a network trace. A logical barrier that stops continued network traversal when a comparison expression evaluates as true. A container class storing a list of UtilityTraceFunctionBarrier objects. A container class storing a list of UtilityTraceFunction. Two sub-expressions combined together using a logical OR operator. Utility network trace parameters. The base class for utility network trace result objects. A list model storing a list of UtilityTraceResult.

A set of options controlling which objects are evaluated or returned during a tracing operation. Vector marker symbol element comprises the pieces of a VectorMarkerSymbolLayer. A list model storing a list of vector marker symbol elements. Vector marker symbol layer represents a marker comprising vector graphics. Information about a vector tile source. A style sheet for a vector tiled layer. Defines areas along the edges of a GeoView that may be obscured by some other UI elements.

Used for specifying labeling properties on the MapView. Base class for classes describing the user’s viewpoint when viewing a map or scene. A base class for the Analysis classes that determine visible and non-visible areas in a scene view. Voice guidance to play at certain locations along a route. A layer that requests images from a tiled image server based on a URL template.

The label Webmap expression expects to hold a legal, Webmap script and to be read and evaluated by a Webmap expression interpreter. Note that quotes are not needed around the literal text. A WMS feature object. A sublayer of a WMS Layer. A WMTS tile matrix set. Enumerates types of angular units that may be represented by AngularUnit. Spatial datasets are considered to be layers whereas non-spatial datasets are tables.

The expected type of the result calculated by an expression described within an ArcadeExpression. The Arcade profile specifies the context under which a script should be executed. This allows the script writer to program against a set of known profile variables and functionality restrictions that are appropriate for their use case.

This includes the set of expected return types. Usage of restricted functionality e. FeatureSets while working in the labeling profile results in an error. Often the restrictions are applied due to performance considerations.

Currently ArcGIS Runtime does not check the required profile variables are present for evaluation within a certain profile, nor does it check the return type is the expected type. Enumerates types of area units that may be represented by AreaUnit. AttachmentSyncDirection indicates the direction that attachment changes are sent between the mobile geodatabase and the service.

AttachmentSyncDirection can be one of:. This is used to determine which basemap to use. These basemaps are secured and require either an APIKey or named user to access them. The BasemapStyle can be one of the following:. Indicates whether tables will contain all rows or can be filtered to a smaller set of related rows.

Used to match the field of view of the Esri::ArcGISRuntime::SceneView to the field of view of a camera lens using the lens characteristics and orientation. This is used to specify whether point features should be symbolized with simplified or paperchart symbols.

When taking an Esri vector tiled basemap service offline e. Primary considerations are the download speed and the size of the resulting. Among other things, file size is influenced by the amount of fonts downloaded from the service. Esri vector tiled basemap layers make use of fonts as part of their style resources – see the vector-tile-style documentation. When you take a vector tiled layer offline, these fonts are downloaded as part of the VectorTileCache.

Esri services also offer an alternative version with a reduced font package size which will reduce the download size of a vtpk by around 80 Mb. You can view a set of vector tile styles which use the reduced font services here. If you are creating a web map that is only intended for taking maps offline and not for online-viewing, these “for export” versions of the services are recommended.

This enumeration describes options for controlling which set of fonts are downloaded. Note that these options only apply to Esri vector tile basemap services.

This option is not recommended for Esri basemap services that do not have an equivalent “for export” version. Enumerates types of rendering modes available for the FeatureLayer. FeatureRenderingMode enumerates rendering modes available for the FeatureLayer. The feature request mode for a service feature table.

This determines 1 whether features are cached locally for quicker access by map and scene layers and 2 whether queries are performed on the local cache or on the server. An enumeration of the session types that control how multiple users access branch versioned data. Session types—transient and persistent—let you control how multiple viewers and editors access branch versioned feature services. By default, a web map or web scene with branch versioned feature services a ServiceGeodatabase version loads as a FeatureServiceSessionType::Transient type; you can change this type to FeatureServiceSessionType::Persistent at the map or scene level when you load the map or scene.

When you switch the ServiceGeodatabase version being used via ServiceGeodatabase::switchVersion QString , a read operation is started on the new version before releasing the previous version. If acquiring a shared lock on the new version fails for example, if another user is editing the version , an error is raised.

This behavior allows you to keep the user connected to the original version when the version they want is not yet available. For additional ways to manage multiple viewers and editors in branch versioned data, such as using multiple tiers of editors, see the ArcGIS Pro discussion on branch version scenarios.

If one or more read operations were already being performed on the ServiceFeatureTable when an edit operation began if a shared lock was already in place , then the shared lock becomes an exclusive lock. When all edit operations are applied successfully, the exclusive lock returns to being a shared lock. A call to ServiceGeodatabase::close will release an exclusive lock. Note that if the ServiceGeodatabase version requested is the default version, no exclusive lock will be acquired. Feature tiling modes available to feature layers.

This determines whether or not to use feature tiling if a service supports it. Using the default mode is highly recommended. As of now, only services based on service feature tables use feature tiling. When determining whether a feed entity has entered or exited a fence polygon, there are two spatial operations that can be used:. These operations determine whether a fence polygon has been entered, and also when it has been exited the feed geometry no longer intersects or is no longer contained by the fence polygon.

Because the contains condition is more strict than intersects a geometry can intersect another geometry without being contained by it it tends to result in fewer notifications when the two geometries are nearby. By using different combinations of these rules for enter and exit, you can control the likelihood that notifications will be sent.

Note that when the feed geometry is a Point , there is no difference between intersection and containment, so both options behave the same.

This option has no effect unless the feed entity geometry is a Polygon. In the diagram above, the feed enters the fence on the left shown in yellow and exits on the right shown in purple. Options that describe how a FenceGeotrigger uses accuracy information from a GeotriggerFeed. This enumeration defines options for using accuracy information from a GeotriggerFeed to provide the Geometry for checking a Geotrigger condition. In particular, you can choose how to use the Location::horizontalAccuracy property to reflect the uncertainty around a fixed Location::position.

Due to various factors, GPS positions may be inaccurate, with Location::horizontalAccuracy representing a radius that defines the area containing the actual location. Spurious notifications may occur when the Location::position is inaccurate and is incorrectly reported as inside or outside of a fence.

You can use the Location::horizontalAccuracy to account for that uncertainty. These values are used in conjunction with FenceGeotrigger::enterExitSpatialRelationship to affect when notifications are sent. The type of a FenceGeotrigger that was met. The type of a FenceParameters. The rule or query that determines whether a FenceGeotrigger condition is met. GenerateLayerQueryOption determines which features are copied from the server when generating a geodatabase.

GenerateLayerQueryOption can be one of:. Enumerates types of geometry builder that may be represented by GeometryBuilder or a class that inherts from GeometryBuilder. Enumerates types of geometry that may be represented by Geometry or a class that inherts from Geometry.

The GeoprocessingExecutionType can be one of:. The type of a GeotriggerFeed. The current status of a GeotriggerMonitor. The type of a GeotriggerNotificationInfo. Enumerates the types of KML list item. This information is used to determine how a KML node is displayed in a list view. Values of type fraction must be between 0. Values below 0. If a non-integral number is specified with a unit type of pixels or insetPixels, it will be rounded down to a whole number e.

An AnnotationLayer or a DimensionLayer that has no LabelDefinition of its own can be added to a map’s operational layers. Their features will be automatically considered by the labeling process, to block labels from being placed such that they overlap the features. This LabelBarrierWeight property controls how much labels must avoid the layer’s features.

Note: Other layer types that have their own LabelDefinition can also have their features treated as barriers, but this is controlled by their LabelDefinition::featureBoundaryOverlapStrategy and LabelDefinition::featureInteriorOverlapStrategy properties. The type specifies which language interpreter should be used to read and evaluate the expression.

The strategy for whether line features with the same label, and matching end vertices, should be joined before sharing a label. The strategy for whether a label should be visible at viewing scales where the feature is too small for the label to fit. The strategy for whether labels should be removed if they have the same text as other labels, to reduce clutter and free up space. The strategy for whether a label should have multiple copies created and placed along or across the same feature.

Multi-row text labels can each be horizontally aligned on the left, right or at their center. By using the LabelStackAlignment, the user can choose to use the TextSymbol::horizontalAlignment property for all labels, or can choose to have the most aesthetic alignment calculated case-by-case for each label depending on its placement position around its feature.

This is particularly useful for labels of dense point features, where labels may move above, below, left or right of their point symbol, in order to fit on the display.

The strategy for whether a row of text should be broken before or after it exceeds the ideal length. If stacking is turned on, label placement can insert a line break before or after the word that overruns the maximum number of characters per row. Determines whether the separator code point should appear at the end of one row, or the beginning of the next. This does not matter if the separator is not to be visible when used.

The strategy for whether the label text should be “stacked” wrapped , rather than placed as a single line or row of text across the map. The layout to use for label text, which can be either horizontal, straight, perpendicular, or follow the line feature.

Centered point labels will stay centered on the point feature, but will be rotated to the angle or horizontal, if none has been defined. Offset point labels will be positioned around the point feature, at the position specified by the angle. The text will lie along this angle, so that it stretches radially from the edge of the point feature. Note that if a label has an angle of zero then its text will be drawn horizontally with respect to the map.

If the map is rotated within the screen, the text will rotate with the map. Line labels will be positioned as usual, but then rotated around their midpoint to lie on a straight line at a tangent to the line geometry at that point. Enumerates supported formats for representing latitude-longitude geographical coordinates as a string.

This status is used to determine whether a layer is displaying in a MapView or SceneView or whether it is still loading, not visible, out of scale, or has encountered an error or warning.

Each layer can have multiple states at the same time. These multiple states are represented using a flags enumeration. A status of LayerViewStatus::Active indicates that the layer is being displayed in the view. Note, that some of the layer view states are not possible together. If you implement a layer list in a table of contents TOCs , you can use the layer view status to manage the TOC user interface.

If the layer completely fails to load or render you will encounter a LayerViewStatus::Error. If the layer fails to render some of its content then you will encounter a LayerViewStatus::Warning. This could be due to the temporary loss of a network connection, failing layer requests or exceeding the max feature count. In both cases you will find more details about the problem in the LayerViewState::error.

When the status is LayerViewStatus::Error, the layer cannot be rendered in the view. For example, it may have failed to load, be an unsupported layer type or contain invalid data. The LayerViewState::error property will provide more details about the specific problem that was encountered.

A warning status indicates that the layer has encountered a problem but may still be usable. For example, some tiles or features may be failing to load due to network failure or server error.

You should be aware that when a LayerViewStatus::Warning is received, the layer may not be showing all data or it may be showing data which is not up-to-date. The LayerViewState::error property will provide more details about the specific problem which was encountered.

Depending on the type of problem, you could: – check your network connection – check whether an online service is experiencing problems. Enumerates types of linear units that may be represented by LinearUnit. An enumeration of the various modes that define how the map view extent reacts to location changes.

Enumerates the lettering scheme and treatment of coordinates at degrees longitude when converting MGRS. Indicates the type of signal or technique being used by the GPS receiver to determine its location. For example it indicates the quality of the signal, or the accuracy and reliability of the location being reported.

The fix type is determined by the receiver based on number of satellites visible, the type of GPS receiver and the GPS technology being used. Enumerates the supported modes for logging in using OAuth. Enumerates whether offline data has updates, has no updates, or that the availability of updates cannot be determined. Enumerates the possible options for dealing with online-only services those which cannot be taken offline. If no settings are provided in the web map, the default behavior will be to omit any online-only layers or tables from the offline map.

Enumerates various types of pan-sharpening for use in a RasterRenderer. Indicates how to display the attachments. When a web map author first creates a map area these packages must be prepared by the relevant online services before the area is ready to be downloaded as an offline map.

PreplannedPackagingStatus lists the possible packaging states for an online map area. The area cannot be downloaded until the value is Complete. This status is returned when your app does not yet know the status of the online area.

Failures encountered while creating packages need to be addressed by the web map author. Note that when the required update packages are not available, the local geodatabase will be replaced with a new copy. Local adds on your device must be uploaded to the feature service before the database can safely be replaced. Be aware that immediately following replacement, the new geodatabase may not contain the new features that have been synced up to the feature service, as this relies on a subsequent scheduled update to download to the client.

The new features will be retrieved when the next scheduled update is downloaded and applied. Enumerates various types of preset color ramps for use in a RasterRenderer.

Enumerates the type of layers we wish to include attachments with when taking feature layers offline. Each of the different supported segment types. The segment type can be accessed by calling Segment::segmentType. Enumerates the behavior of service area output from multiple facilities in relation to one another.

Enumerates the behavior of service area output for a single facility when multiple cutoff values are specified. Use the Count property to count the open reports and make sure that the report number is not greater than the number of open reports. The control number you specified is greater than the number of controls.

Use the Count property to count the controls on the form or report and then check that the control number you cite is within the range of existing controls. You can’t refer to the Parent property of a form or report when either is open in Design view.

There is no sorting or grouping field or expression defined for the group level number you used. A valid group level number can be from 0 for the first field or expression you sort or group on through 9 for the tenth. Count the group levels in the report starting with zero. Microsoft Access can’t find the field ‘ 1’ referred to in your expression. You may have misspelled the field name, or the field may have been renamed or deleted.

The expression you entered has an invalid reference to the Dynaset property. For example, you may have used the Dynaset property with a form that isn’t based on a table or query. The expression you entered refers to an object that is closed or doesn’t exist. For example, you may have assigned a form to a Form object variable, closed the form, and then referred to the object variable.

The value you entered for the interval, number, or date argument in the function is invalid. Check the argument to make sure that you entered it correctly. For more information on valid argument values, search the Help index for ‘DatePart function,’ ‘DateAdd function,’ or ‘DateDiff function’. The expression 2 you entered in the form control’s ValidationRule property contains the error 1. Microsoft Access can’t parse the ValidationRule expression you entered.

To help you create expressions as arguments in Visual Basic, use the Expression Builder. For more information, search the Help index for ‘Expression Builder’. There is a n ‘ ‘ in the form control’s ValidationRule property. The expression 2 you entered as the event property setting produced the following error: 1.

The expression you entered requires the control to be in the active window. Else statement. Microsoft Access doesn’t allow you to use this method in the current view. Most methods, including the SetFocus and Requery methods, can’t be used in form or report Design view. The event procedure ‘ ‘ can’t be a Function procedure; it must be a Sub procedure. You referred to a property by a numeric argument that isn’t one of the property numbers in the collection.

Check the property numbers in the collection. Microsoft Access cannot find the name ‘ 1’ you entered in the expression. You may have specified a control that wasn’t on the current object without specifying the correct form or report context. To refer to a control on another form or report, precede the control name with the name of a collection.

This is usually either Forms or Reports, and the name of the form or report to which the control belongs. For example, Forms! You can’t move to a previous control when only one control has had the focus.

Use the PreviousControl property only after you’ve moved the focus to a second control. Microsoft Access cannot find the object ‘ 1. You can’t carry out this action at the present time.

You tried to run a macro or used the DoCmd object in Visual Basic to carry out an action. However, Microsoft Access is performing another activity that prevents this action from being carried out now. For example, no actions on a form can be carried out while Microsoft Access is repainting a control or calculating an expression. Carry out the action later. The Object Type argument for the action or method is blank or invalid.

You can’t use the ApplyFilter action on this window. Use the SelectObject action or method to select the table, query, form, or report before applying the filter.

The object ‘ ‘ isn’t open. Use one of the Open actions or methods to open the object so that you can carry out the desired action. The action or method is invalid because the form or report isn’t bound to a table or query. However, the form or report you applied the filter to is not based on a table or query, so the form or report doesn’t have any records to apply a filter to. Use the SelectObject action or method to select the desired form or report before you run the ApplyFilter action.

To base a form or report on a table or query, open the form or report in Design view, and enter the table or query name in the RecordSource property. Microsoft Access can’t find the macro ‘ 2’ in the macro group ‘ 1. You then tried to run the macro directly or indirectly , or you used the RunMacro method to run the macro. However, the macro you specified isn’t in this macro group. Create the macro in the macro group, specify the correct macro group, or specify the correct macro name.

The action or method requires a Form Name argument. You tried to use the OpenForm action or method, but you left the Form Name argument blank. In the Form Name argument, enter the name of a form in the current database. The action or method requires a Table Name argument.

In the Table Name argument, enter the name of a table that is in the current database. The action or method requires a Query Name argument. You tried to use the OpenQuery action or method, but you left the Query Name argument blank. In the Query Name argument, enter a query name.

The action or method requires a Report Name argument. You tried to use the OpenReport action or method, but you left the Report Name argument blank. In the Report Name argument, enter the name of a report. An expression you entered is the wrong data type for one of the arguments. You tried to run a macro or use a method to carry out an action, but an expression evaluated to the wrong data type. For example, for the Close method you specified a string for the Object Type argument, but this argument can be set only to certain intrinsic constants or their numeric equivalents.

You must enter a number greater than zero for a Repeat Count argument. You tried to use the RunMacro action or method, but you entered a value less than zero or an expression that evaluates to less than zero in the Repeat Count argument. To run the macro once, leave this argument blank.

The action was canceled. You used a method of the DoCmd object to carry out an action in Visual Basic, but then clicked Cancel in a dialog box. For example, you used the Close method to close a changed form, then clicked Cancel in the dialog box that asks if you want to save the changes you made to the form.

The action or method requires a Macro Name argument. In the Menu Macro Name argument, enter the name of a macro or macro group that is in the current database.

You can’t use this action with the DoCmd object. For a list of the actions that the DoCmd object doesn’t support and some alternatives to using these actions, click Help. Any actions that aren’t in this list can be used with the DoCmd object. The action or method requires at least argument s. You tried to run a macro containing an action or used a method or action with the DoCmd object, but you didn’t set the required number of arguments.

For example, if you use the MoveSize action, you must set at least one of the four arguments. An expression in argument has an invalid value. You tried to run a macro or used the DoCmd object in Visual Basic. The argument number above is the position of the argument as it appears in the Macro window, the Action Failed dialog box, or the Object Browser if you’re using the DoCmd object. A value you entered for the Transfer Type argument is invalid. An expression in the Transfer Type argument doesn’t evaluate to a valid numeric value.

The type isn’t an installed database type or doesn’t support the operation you chose. You used the TransferDatabase method, but an expression in the databasetype argument doesn’t evaluate to a valid database type for importing, exporting, or linking. For information on valid database types, click Help. A value you entered for the spreadsheettype argument is invalid. You used the TransferSpreadsheet method, and an expression in the spreadsheettype argument doesn’t evaluate to a valid numeric value.

Valid values are 0, 2, 3, 4, 5, 6, 7, and 8. Note that 1 is an invalid value; you can’t import or export to a Lotus. The expression you entered in the Specification Name argument exceeds the character limit. Select one of the existing specification names from the argument list box when you use the TransferText action in a macro, or enter a name in Visual Basic that follows Microsoft Access object-naming rules.

The action or method requires a Specification Name argument. You tried to use the TransferText action or method and you specified a Transfer Type argument but left the Specification Name argument blank. In the Specification Name argument, enter an existing specification name from the argument list box. Microsoft Access cannot parse the expression: ‘ 1’. Click OK to return to the action argument or conditional expression where this expression appears, and then correct the syntax.

The Macro Name argument can’t be longer than 64 characters according to Microsoft Access object-naming rules. The action or method requires a Control Name argument.

You tried to use the GoToControl action or method, but you left the control name blank. In the Control Name argument, enter a control or field name from the active form or datasheet. Microsoft Access cannot open the macro ‘ 1’ because it was saved using a different version of Microsoft Access. Re-create the macro in the current version of Microsoft Access. Microsoft Access cannot find the module ‘ 1.

Enter a valid module name from the current database. Microsoft Access cannot find the procedure ‘ 1. The action or method requires a Module or Procedure Name argument. You tried to use the OpenModule action or method, but you didn’t enter a name in either the Module Name or the Procedure Name argument in the Macro window.

Enter a valid name in one of these arguments. The action or method requires a File Name argument. You tried to use the TransferSpreadsheet or TransferText action or method. In the File Name argument, enter a file name. The value you entered for the show argument is invalid. You used the ShowToolbar method.

Valid values for this argument are acToolbarYes, acToolbarWhereApprop, and acToolbarNo, or the corresponding numeric values 0, 1, and 2. Microsoft Access can’t invoke the application using the RunApp action. The path to the application is invalid, or a component of the application is missing. Check the path in Windows Explorer or File Manager.

Macros can only be called 19 times. Your macro contains one or more RunMacro actions that calls a macro more than 19 times. Use an If block to stop the macro after it has been run 19 times.

Convert your. Microsoft Access cannot find the macro or sub procedure ‘ 1. Note that when you enter the macrogroupname. Also, ensure that the referenced macro has been saved, or that the referenced sub procedure expects 0 arguments.

You tried to run a macro containing an ApplyFilter action, but you didn’t set the required arguments. The action or method requires a data access page Name argument. You tried to use the OpenDataAccessPage action or method, but you left the data access page Name argument blank.

In the data access page Name argument, enter the name of a data access page in the current database. The ApplyFilter action contains a Filter Name that cannot be applied. The filter name is not a valid argument in the ApplyFilter action in Client Server. The Name argument of the SetLocalVar macro action is a reserved name. Please change the name argument of the SetLocalVar action. The file ‘ 1’ you tried to replace is a Microsoft Access system file that is being used and can’t be replaced or deleted.

The contents of the Clipboard have been deleted and can’t be pasted. Some applications do not put large objects on the Clipboard. Instead, they put a pointer to the object on the Clipboard. The pointer may vanish before the paste happens. Specify the database name in the command line so that Microsoft Access can find the macro.

Microsoft Access cannot find the 1 you referenced in the Object Name argument. The macro you tried to run includes a SelectObject action with an invalid name for the Object Name argument. In the Navigation Pane, verify the name of the object you want the macro to select. Then open the macro in the Macro window and enter the correct name for the Object Name argument. The CopyObject action requires you to specify a different destination database or a new name to copy from the current database.

The macro you are running includes a CopyObject action. Open the macro in the Macro window, and select the CopyObject action. Enter a destination database or a new name in the appropriate argument box. Select a database object in the Navigation Pane before you run the macro containing the action.

The database ‘ ‘ you tried to delete and replace is read-only and can’t be deleted or replaced. Enter a different name for the new database. Microsoft Access can’t run the Security Wizard because this database is open in exclusive mode.

Do you want Microsoft Access to open the database in shared mode and run the Security Wizard? Microsoft Access can’t delete 1 after compacting it. The compacted database has been named 2. If you compact a database using the same name, Microsoft Access creates a new compacted database and then deletes the original database.

In this case, however, the original database wasn’t deleted because it is read-only. If you can, remove the read-only status, delete the original database, and then rename the new database using the original name.

If you can’t remove the read-only status, inform your workgroup administrator. Microsoft Access can’t delete 1 after encoding it. The encoded database has been named 2. If you encode a database using the same name, Microsoft Access creates a new encoded database, and then deletes the original database.

In this case, however, the original database can’t be deleted because it is read-only. Microsoft Access can’t delete 1 after decoding it. The decoded database has been named 2. If you decode a database using the same name, Microsoft Access creates a new decoded database, and then deletes the original database. You can’t encode a database that you didn’t create or don’t own.

See the owner of the database or your workgroup administrator. You can’t decode a database that you didn’t create or don’t own. Can’t find the database you specified, or you didn’t specify a database at all. Specify a valid database name in the command line, and include a path if necessary. Microsoft Access can’t run the Security Wizard because the database uses a password.

The database you tried to convert was either created in or was already converted to the requested version of Microsoft Access. Microsoft Access was unable to refresh the linked table ‘ 1’ in database ‘ 2’ during conversion. You can’t hide the document ‘ ‘ while it is open.

Close the database object first, and then hide it. You can’t unhide the database object ‘ ‘ while it is open. Close the database object first, and then unhide it. Microsoft Access is unable to set the application’s icon to the file ‘ 1’. Make sure the file is a valid icon. If you’re using Microsoft Windows, you can also use.

Microsoft Access can’t open or convert this previous version database. The database was created in an earlier version of Microsoft Access.

You don’t have appropriate security permissions to open or convert databases created in earlier versions. Microsoft Access can’t undo this operation. An object with the same name already exists. Another user might have created an object named ‘ ‘ after you had performed this operation on an object with the same name. You cannot modify objects created in an earlier version of Microsoft Access.

To convert this database to the current version of Microsoft Access, close the database, click the File tabn, and then click Convert. This database is in an unexpected state and Microsoft Access cannot open it. Converting by using the DAO CompactDatabase method has left the database in a partially converted state. If you have a copy of the database in its original format, click the File tab and then click Convert to convert it.

If the original database is no longer available, create a new database and import your tables and queries to preserve your data and try again. Your other database objects cannot be recovered.

This database is a replica created in a different version of Access. You can only convert this replica by synchronizing with its Design Master. Convert the Design Master of this replica set then synchronize the replica with the Design Master. You can’t create another Microsoft Access database with the same name and location as an existing database. You carried out the Make MDE File command, but tried to give the new database the same extension as the old one.

Accept the default. This database is a Microsoft Access 7. If you click OK, the database you selected will be renamed to 1 and then converted to 2. Everyone using a replica of this database will have to upgrade to Microsoft Access after the next synchronization.

The database is already open. Local forms, reports, macros, and modules in this replica will not be converted. To retain these objects, please be sure to import them into the Design Master from the original replica. The record source ‘ ‘ specified on this form or report does not exist. The name of the recordsource may be misspelled, the recordsource was deleted or renamed, or the recordsource exists in a different database. In the Form or Report’s Design view or Layout view, display the property sheet by clicking the Properties button, and then set the RecordSource property to an existing table or query.

You must define a sort field or expression for the group header or footer in the report you tried to preview or print. The ApplyFilter action or method can be carried out only from an Open macro or Open event procedure.

To use the ApplyFilter action in a report, set the OnOpen property to the name of the macro, close the report, and then reopen it. You can’t use aggregate functions in a page header or footer. The page header or footer of the report you tried to preview contains a calculated control with an aggregate function in its expression. If you want to show the result of an aggregate function in a page header or footer, create a hidden calculated control in an appropriate section of the report. Then create an unbound text box in the page header or footer.

If you are running a macro, use the SetValue action to set the unbound text box value to the value in the hidden control. This action can’t be carried out while processing a form or report event. When you click OK, an Action Failed dialog box will display the name of the macro that failed and its arguments. Having both properties set to False can make the report print continuously.

Revise the macro or function so that it sets these properties to the values you want. Microsoft Access can’t complete the Output operation. The Visual Basic code you entered contains a syntax error or the Output procedures are not available. Make sure there isn’t a syntax error in your code. If the syntax is correct, run Setup to reinstall Microsoft Access.

For information on backing up files, search the Microsoft Windows Help index for ‘backing up files’. The expression ‘ ‘ is invalid. Aggregate functions are only allowed on output fields of the Record Source. Unable to bind the report to the specified recordset because the shape does not match the sorting and grouping specified on the report.

You don’t have permission to read ‘. For more information on permissions and who can set them, click Help. You don’t have permission to modify ‘. If the object is a table, you must also have Delete Data and Update Data permissions for it. You don’t have permission to run ‘. You can’t view this object’s permissions. To view or change permissions for this object, you must have Administer permission for it. You can’t remove this user account from group ‘ 1. Microsoft Access automatically adds all users to the default Users group.

To remove a user account from the Users group, you must first delete the account. There must be at least one user in the Admins group. You don’t have permission to cut ‘. If the object is a table, you must also have Delete Data permission for it. You don’t have permission to copy ‘. If the object is a table, you must also have Read Data permission for it. You don’t have permission to delete ‘.

You must enter a personal identifier PID consisting of at least 4 and no more than 20 characters and digits. Primary Holding Federal Circuit affirms findings of infringement with respect to patents that disclose circuits that generate and receive irregular repeat and accumulate codes, a type of error correction code designed to improve the speed and reliability of data transmissions.

Justia Legal Resources. Find a Lawyer. Law Students. US Federal Law.

 
 

 

– FAQs for Alumni Virtual Programs – Alumni – Harvard Business School

 

Broadcom Ltd. California Institute v. Opinion Annotation. Download PDF. Primary Holding Federal Circuit affirms findings of infringement with respect to patents that disclose circuits that generate and receive irregular repeat and accumulate codes, a type of error correction code designed to improve the speed and reliability of data transmissions.

Sub or Function not defined. Bad file name or number. Input past end of file. Can’t rename with different drive. Object variable or With block variable not set. For loop not initialized. Invalid pattern string. Unable to sink events of object because the object is already firing events to the maximum number of event receivers that it supports. A property or method call cannot include a reference to a private object, either as an argument or as a return value. Property or method not found. ActiveX component can’t create object.

Class does not support Automation or does not support expected interface. Object doesn’t support this property or method. Connection to type library or object library for remote process has been lost. Press OK for dialog to remove reference. Object doesn’t support this action. Object doesn’t support named arguments.

Object doesn’t support current locale setting. Named argument not found. Argument not optional. Wrong number of arguments or invalid property assignment.

Property let procedure not defined and property get procedure did not return an object. Specified DLL function not found. Code resource not found. Code resource lock error. You tried to perform an operation involving a function or feature that was not installed in this version of Microsoft Access. There isn’t enough memory to perform this operation. Close unneeded programs and try the operation again.

There isn’t enough free memory to start Microsoft Access. Close unneeded programs and try again. For information on freeing memory, search the Microsoft Windows Help index for ‘memory, troubleshooting’. The object name ‘ 1’ you entered doesn’t follow Microsoft Access object-naming rules. For more information about naming objects, click Help. You already have an open database object named ‘.

If you want this object to replace the original object, close the original object, and then save this object using the same name. For more information on renaming a database object, click Help. You can’t delete the database object ‘ ‘ while it’s open. Close the database object, and then delete it. You can’t rename the database object ‘ ‘ while it’s open. Close the database object, and then rename it. You have given this 1 the same name as an existing 2 in your database.

You can’t give a table and a query the same name. Give this object a name that isn’t already used by another table or query. There are no registered wizards of this type. If you want to preserve your security or custom settings, back up the Microsoft Access workgroup information file.

For more information on backing up files, search the Microsoft Windows Help index for ‘backing up files’. Microsoft helps protect this Visual Basic for Applications Project with a password. You must supply the password in the Visual Basic Editor before you can perform this operation.

The data access page name ‘ ‘ you entered is misspelled or refers to a data access page that isn’t open or doesn’t exist. The number you used to refer to the data access page is invalid. Use the Count property to count the open data access pages and make sure that the page number is not greater than the number of open data access pages minus one. One or more operators in the filter expression is invalid. For a valid list of operators refer to the help file 1 1. You entered an expression that requires a data access page to be the active window.

The report snapshot was not created because you don’t have enough free disk space for temporary work files. To fix this, free up disk space for example, empty the Recycle Bin or delete unnecessary files. Microsoft Office applications cannot suspend while you have documents open from a network location. Exit the applications or close the open documents and try again.

The Microsoft Access project ‘ 1’ will be opened read-only because one of the following occurred: Either the file is locked for editing by another user, the file or the folder in which it is located is marked as read-only, or you specified that you wanted to open the file read-only. Microsoft Access could not perform name AutoCorrect during this operation. Objects is not checked out. A system error occurred, or there isn’t enough free memory to start Microsoft Access.

Microsoft Access can’t find the database file ‘ 1. You can’t exit Microsoft Access now. The command line you used to start Microsoft Access contains an option that Microsoft Access doesn’t recognize. Exit and restart Microsoft Access using valid command-line options.

The command or action ‘ 1’ isn’t available now. Use only those commands and macro actions that are currently available for this database. There isn’t enough free memory to open the file ‘. For more information on freeing memory, search the Microsoft Windows Help index for ‘memory, troubleshooting’. The object name ‘ 1’ can’t be longer than 2 characters according to Microsoft Access object-naming rules.

Rerun the Microsoft Access Setup program. There isn’t enough stack memory left to perform the operation. The operation is too complicated. Try simplifying the operation. The file ‘ 1’ is incompatible. Microsoft Access needs to be reinstalled.

Run Setup to reinstall Microsoft Access. Microsoft Access cannot find the object ‘ 1’. Make sure the object exists and that you spell its name correctly. You can’t create a field list based on the action query ‘. A form or report must be based on a table, or on a select or crosstab query.

Change the RecordSource property for the form or report, or open the action query and change it to a select query. Microsoft Access can’t create, open, or write to the index file ‘ 1’; the information. The menu bar value ‘ ‘ is invalid. You supplied an argument to the DoMenuItem method that refers to a menu bar that is invalid.

Use an intrinsic constant or numeric value that refers to a valid menu bar value, such as acFormbar. The name for the menu, command, or subcommand you entered is invalid.

You supplied an argument to the DoMenuItem method that refers to a menu name, command, or subcommand that is invalid. Use an intrinsic constant or numeric value that refers to a valid menu, command, or subcommand value, such as acRecordsMenu. A menu bar macro can only be run if the menu bar macro name is the setting used by particular properties or options. You tried to run a menu bar macro containing the AddMenu action.

This error also occurs if Microsoft Access attempts to run a menu bar macro containing an AddMenu action that follows an action that makes some other object the active object. For example, the OpenForm action. The selected item is customized and doesn’t have context-sensitive Help. For more information on creating custom Help for a form, report, or control, click Help.

The key or key combination 1 in 2 has invalid syntax or is not allowed. Use the SendKeys syntax to specify the key or key combinations. For the allowed key or key combinations, click Help.

You already assigned the key or key combination 1 in 2 to another macro. Only the first key or key combination will be used. The Docking property can’t be set to ‘ 1’ at this time. If you want to set the Docking property to ‘ 2’, move the toolbar from its current position and try again.

Help isn’t available due to lack of memory or improper installation of Microsoft Windows or Microsoft Access. For more information on troubleshooting a low memory problem, search the Microsoft Windows Help index for ‘memory, troubleshooting’. If you need to reinstall Microsoft Access, you may want to preserve your security or custom settings. To do so, back up the Microsoft Access workgroup information file. The toolbar or menu already exists.

Do you want to replace the existing toolbar or menu? The database ‘ ‘ is read-only. You can’t save changes made to data or object definitions in this database. Microsoft Access can’t display the Add-ins submenu. The Add-ins submenu expression ‘ 1’ you entered exceeds the character limit.

Shorten the macroname or functionname expression in the Menu Add-ins key of the Windows Registry setting, and then restart Microsoft Access. Microsoft Access can’t display the Add-ins submenu 1 because a setting you entered in the Windows Registry is missing a macro name or function name expression.

An action within the current global menu’s macro group can’t change the global menu bar. Microsoft Access can’t display the global menu bar because the macro called when you first set the global menu includes another action that tries to reset the global menu. Check your menu bar macros, and make sure that you set the global menu bar only once. The value you specified for the Setting argument in the SetOption method is not the correct type of Variant for this option.

You specified a string when Microsoft Access expected a number. See the Access Options dialog box click the File tab, and then click Access Options to see what type of data is required to set this particular option. For example, the setting for the Default Database Folder option must be a string.

For more information, search the Help index for ‘Variant data type’ and ‘VarType function’. The numeric value for the Setting argument in the SetOption method does not correspond to any list box or option group settings in the Access Options dialog box. Valid settings are 0 the first item in the list through the last item in the list.

Microsoft Access cannot find the toolbar ‘ 1. To convert this database to the current version of Microsoft Access, click the File tab, and then click ‘Convert’. The operation could not be completed because the Action Tag ‘ ‘ is not recognized by your system. The control or subform control is too large for this location. The number you entered for the Left, Top, Height, or Width property is too large or is a negative number. Reduce the size of the control or subform control, or enter a positive number.

The setting you entered isn’t valid for this property. To see the valid settings for this property, search the Help index for the name of the property. The form name ‘ ‘ is misspelled or refers to a form that doesn’t exist. If the invalid form name is in a macro, an Action Failed dialog box will display the macro name and the macro’s arguments after you click OK.

Open the Macro window, and enter the correct form name. The report name ‘ ‘ you entered in either the property sheet or macro is misspelled or refers to a report that doesn’t exist. If the invalid report name is in a macro, an Action Failed dialog box will display the macro name and the macro’s arguments after you click OK.

Open the Macro window, and enter the correct report name. You entered the control name ‘ ,’ which is already in use. You already have a control on the form with this name, or an existing control has its name mapped to this name for Visual Basic. Visual Basic maps spaces in control names to underscores. You loaded a form or report that has controls or properties that Microsoft Access doesn’t recognize and will ignore.

The value you entered does not meet the validation rule defined for the field or control. To see the validation rule, switch to Design view or Layout view, click the appropriate field, and then, if the property sheet is not open, press F4. Then, click the Data tab in the property sheet. Enter a value that meets the validation rule, or press ESC to undo your changes. Set the macro or method to the AfterUpdate property instead of the BeforeUpdate property so it saves the field before changing the focus.

Microsoft Access can’t move the focus to the control 1. The changes you made can’t be saved. The save operation may have failed due to the temporary locking of the records by another user. You may need to click OK several times or wait until the other user closes the table.

The value you entered isn’t valid for this field. For example, you may have entered text in a numeric field or a number that is larger than the FieldSize setting permits.

Microsoft Access doesn’t support the format of the file ‘ 1,’ or file is too large. Try converting the file to BMP format. The macro or function set to the BeforeUpdate or ValidationRule property for this field is preventing Microsoft Access from saving the data in the field. The value violates the validation rule for the field or record.

For example, you might have changed a validation rule without verifying whether the existing data matches the new validation rule. Click Undo to restore the previous value, or enter a new value that meets the validation rule for the field or record.

Microsoft Access has canceled the Paste operation. The text on the Clipboard is too long to paste into the form. For example, you may have pasted too much text into a label or entered too much text in the ColumnWidths property. Paste smaller sections.

For labels, you must paste fewer than 2, characters. You must save the current field before you run the Requery action. The Requery action can’t be used on the control ‘. To create a form, report or data access page using this wizard, you must first select the table or query on which the form, report or data access page will be based. Microsoft Access can’t open the form ‘ 1. Re-create the form or, if you maintain backup copies of your database, retrieve a copy of the form.

You can’t view a form as a continuous form if it contains a subform, an ActiveX control, a bound chart or a Web browser control. The setting for the BoundColumn property can’t be greater than the setting for the ColumnCount property. Microsoft Access encountered errors while importing 1.

For more detailed error information, see the file ‘ 2’. Enter 1, 2, 3, or 4 for the DefaultEditing property. The setting for the DecimalPlaces property must be from 0 through 15, or for Auto default. You can’t place a form or report within itself. Select or enter a different form or report to serve as the subform or subreport. To set this property, open the form or report in Design view. For more information on this property, search the Help index for the name of the property.

You can’t use Find or Replace now. You can’t search the field for the specified value. Resolve the error given in the previous error message before you attempt to search again. You can’t replace the current value of the field with the replacement text.

Resolve any errors before making further replacements. Microsoft Access cannot save the change you made to the record in the Replace operation for the reason shown in the previous message. Click Undo or enter a new value in the field. The FindRecord action requires a Find What argument. You tried to run a macro set to one of the current field’s properties, but you left the Find What argument blank.

When you click OK, an Action Failed dialog box will display the macro name and the macro’s arguments. In the Macro window, enter text or an expression for the Find What argument, and try the Search operation again. You didn’t specify search criteria with a FindRecord action. The ColumnWidths property setting must be a value from 0 through 22 inches If there is more than one column, separate the numbers with either a semicolon or the list separator character.

The number you used to refer to the form or report section is invalid. Make sure that the number is less than the number of sections in the form or report. The constant you entered for the control type is invalid. For a list of valid constants you can use to create a control, click Help. The parent control can’t contain the type of control you selected.

For example, you used the CreateControl function to designate an option group as the parent of a text box.

The sum of the top margin, the bottom margin, the height of the page header, and the height of the page footer is greater than the length of the page you are printing on. There isn’t enough memory to initialize the Print method or one of the report graphics methods Circle, Line, PSet, Scale. Close unneeded programs and try again to print or preview the report. Microsoft Access couldn’t create the graphic or text. An error occurred while initializing the Print method or one of the report graphics methods Circle, Line, PSet, Scale.

The text or expression you entered doesn’t match the type of data you are searching for. Redefine the text or expression, or search in a different field. A macro set to one of the current field’s properties failed because of an error in a FindRecord action argument.

The page number you used as an argument for the GoToPage action or method doesn’t exist in this form. You can’t save this record at this time. Microsoft Access may have encountered an error while trying to save a record.

If you close this object now, the data changes you made will be lost. Do you want to close the database object anyway? There isn’t enough memory to retrieve data for the list box. Close unneeded programs. Then close and reopen the active form, and click the list box again.

You can’t have more than seven nested subforms in a main form. Remove the eigth nested subform. You can’t use a pass-through query or a non-fixed-column crosstab query as a record source for a subform or subreport. Before you bind the subform or subreport to a crosstab query, set the query’s ColumnHeadings property. The control ‘ ‘ the macro is attempting to search can’t be searched. You can’t switch to a different view at this time. Code was executing when you tried to switch views. If you are debugging code, you must end the debugging operation before switching views.

There isn’t enough free memory to continue the Search operation. Then try the Search operation again. The setting for this property is too long. You can enter up to either or 2, characters for this property, depending on the data type. You can’t add another section now. The maximum total height for all sections in a report, including the section headers, is inches cm. Remove or reduce the height of at least one section, and then add the new section.

You can’t sort on a calculated field in a form. You can sort on a calculated field only in a query. Create a calculated field in a query, sort the field, and then base the form on the query. Because the query must execute before the form opens, the form will open more slowly. Microsoft Access can’t create an object of the type requested. You are trying either to create a form from a report that has been saved as text, or to create a report from a saved form. The value you used for the TabIndex property isn’t valid.

The correct values are from 0 through. You can’t reference a property or method for a control unless the control has the focus. In Visual Basic code, use the SetFocus method. In a macro, use the GoToControl action.

This property isn’t available in Design view. Switch to Form view to access this property, or remove the reference to the property. The object you attempted to load from text has an invalid value for the property ‘ 1’ on a 2. The code contains a syntax error, or a Microsoft Access function you need is not available. If the syntax is correct, check the Control Wizards subkey or the Libraries key in the Microsoft Access section of the Windows Registry to verify that the entries you need are listed and available.

If the entries are correct, either you must correct the Microsoft Access Utility Add-in, or the file acWzlib or this wizard has been disabled. You can’t set the property in print preview or after printing has started.

Try setting this property in the OnOpen event. A separator character in a label, where a line break may be inserted in long text. A list model storing a list of stack separator options available in a label.

Labeling information about a sublayer of a map service or feature service. Represents a grid consisting of east-west lines of latitude and north-south lines of longitude also known as graticules.

Represents a layer that displays data on a map. Marker interface inherited by all types of layers. Describes how features in a FloorAware layer are associated with floor levels of a facility. A list model storing a list of layers available in a map. Contains 3D-specific rendering properties for a layer. Temporal information about a time-aware sublayer of a map service or feature service. A helper class that provides information about the state of a layer.

Legend information from a Layer. A list model storing a list of LegendInfos available for a LayerContent type. The layer and field properties for the layer that contains floor levels. LOD information: level, resolution and scale. Runtime license information. Contains information for licensing an app for Lite or Basic-level functionality from a portal instance. Runtime license result information. A base class containing common functionality for line-of-sight analysis objects.

Represents a straight line between a start and end point. Base class for line symbols. Indicates the specific units of measurement of an instance of LinearUnit, or linear measurement operation. Contains properties which set the rendering behavior for the contents of a map or scene as they are loaded.

Marker interface inherited by classes that can load metadata asynchronously. An object that represents a pending feature edit specifying its edit operation and most recent edit time. An iterator for a collection of LocalFeatureEdit. An object that represents the LocalFeatureEdit results in ascending order, based on edit time.

A feature service that runs on the local server. A local geoprocessing service which runs on an instance of Local Server. An item in a local data store such as a mobile map package. A map service that runs on the local server. A local server instance. The base class for local service classes.

Represents a location update from a position source. Controls displaying position information and updates on a MapView. An analysis object that evaluates direct, vertical, and horizontal distances between two points defined by start and end point locations.

An analysis object that evaluates visibility along a line defined by observer and target point objects. A collection of well-known constant strings for keys in Location::additionalSourceProperties. The result of converting a scene location to a screen point. An analysis object that renders a viewshed for a specified point location.

Information about a Locator’s attributes. Information about an Address Locator. A task for Geocoding and Reverse Geocoding that supports both online and offline capabilities.

Filter features from the display based on the specified active display filter. A map that can be displayed on the screen by the mapview.

A MapGraphicsView renders data in a map and allows users to interact with the map. A MapQuickView renders data in a map and allows users to interact with the map.

The capabilities of a map service. Sublayer source that refers to an existing layer in the current map service. A MapView renders data in a map and allows users to interact with the map. Base class for 3D marker scene symbols. Base class for marker symbols. A base class for marker symbol layers, representing a symbol layer used to display a marker. Represents a pop-up element of type media that is displayed in a pop-up for a geoelement.

A layer that can display the basemap layer of a map from mobile map package. A mobile map package. A mobile scene package. Used to display point or multipoint geoelements in a scene using a 3D model. A geodatabase model designed for managing a collection of raster images. A rule determining how a requested image should participate in the mosaic. A multi-layer point symbol.

A multi-layer polygon symbol. A multi-layer polyline symbol. Base type for multi-layer symbols. Multipart geometry is comprised of a collection of shapes. Base class for builders of geometries that consist of multiple parts, such as Polyline and Polygon.

An ordered collection of points that can be managed as a single geometry. Helper class for building immutable multipoint geometries. A singleton class to configure HTTP network caching options.

A stop or barrier’s corresponding location of a source feature in the network dataset. Information about the progress of a network request. An NMEA location object. A NMEA location data source object. Client authentication information obtained from registering an application with a portal or ArcGIS Online.

Describes whether a layer or table can be included in an offline map. The capability of taking a map’s layers and tables offline. Contains properties to override the offline map’s item properties. A key consisting of a service URL and type of an online service.

A job to synchronize an offline map’s geodatabases with their originating services. The result of an OfflineMapSyncJob for a single layer or table. Parameters used for creating an OfflineMapSyncJob. The result of an OfflineMapSyncJob. A task with methods related to synchronizing an offline map’s geodatabases with their originating services. A task with methods related to taking a map offline and synchronizing online and offline maps.

Describes supported methods for obtaining updates for a preplanned map area. Provides information on the available updates for an offline map. Represents settings in an online web map which the author has configured for offline use. A layer that requests images from OpenStreetMap servers. Provides orbital camera navigation around a stationary or moving GeoElement. Provides orbital camera navigation around a stationary or moving point object.

Contains a field name and sort order for use in a query where the results are sorted. Ownership-based access control information for the features of a feature service layer. Represents a single part of a multipart builder. A mutable collection of parts for creating a Multipart geometry from a MultipartBuilder. A percent clip stretch parameters object.

Uses an image to symbolize the fill for a Polygon GeoElement. A symbol layer that fills polygon geometry with an image. The specified image fills the layer’s polygon if it is the only symbol layer in a MultilayerPolygonSymbol.

If a single image doesn’t completely fill the geometry, it is tiled to complete the fill. Uses an image to symbolize GeoElements that have Point or Multipoint. Represents a symbol layer used to place a picture marker on a point geometry. Represents a specific location, defined by x and y and optionally z coordinates, and a SpatialReference. A Point indicating where the network analysis should not traverse. Helper class for building immutable Point geometries.

A point cloud layer. Represents a mutable collection of Points for creating a Multipoint geometry from a MultipointBuilder. A geometry with an area shape defined by a collection of parts. A polygon indicating where the network analysis should not traverse.

Helper class for building immutable polygon geometries. A linear shape defined by a collection of segments. A Polyline indicating where the network analysis should not traverse. Helper class for building immutable polyline geometries. The combination of a PopupDefinition and a GeoElement , which allows a visual representation of the GeoElement ‘s attributes as well as the ability to edit them. An attachment to a Popup, which contains the attachment data and some additional metadata about the attachment.

Manages PopupAttachments for a Popup. A list model used for viewing and editing attributes in a Popup. Defines how a Popup will be displayed and behave.

Represents an element that is displayed in a pop-up for a geoelement. Defines an Arcade expression within a Popup. The result from evaluating a Popup Arcade expression.

A representation of a GeoElement ‘s attribute field in a Popup. The formatting of a field when used in a Popup. A list model storing pop-up fields. Manages the viewing and editing of a Popup. The media that is displayed in a Popup for a GeoElement. Contents of an individual media element in a popup. Contains information about displaying related features in a popup.

Defines the order in which related features of a particular relationship are sorted for displaying in a popup. Marker interface inherited by layers and overlays that can display Popups. Represents a view into a portal by a user, either anonymous or with a Credential.

A folder used to organize a user’s portal items. Represents the folders in the root folder of a user. Represents a group within a Portal or Organization. Represents a particular set of groups in a portal. Container for helper services that are provided by the portal. Information about a portal as seen by the current user, anonymous or logged in.

An item in a portal. Information about a comment on a PortalItem. Represents the list of comments relating to a PortalItem. Represents a list of portal items. Represents a particular privilege possessed by a portal user. Represents the set of privileges possessed by a portal user. Base class for parameters needed to perform a query within a Portal.

The query parameters suitable for finding groups contained in a portal. The query parameters suitable for finding content contained in a portal. This class represents results of a groups query performed on a portal. This class represents results of an items query performed on a portal. Represents the result of moving portal items. A registered user of a portal or organization.

Represents a single preplanned offline map area. The list of preplanned map areas available obtained from an offline map task. Contains parameters for a query for features. A RGB composite raster renderer. A domain which specifies a range of valid values for a field. An object that describes a RangeDomain to be created. Represents raster data that can be rendered using a RasterLayer. A file-based raster elevation source.

An operation that can be performed on one or more rasters or a mosaic dataset by applying on-the-fly processing. Represents arguments associated with a raster function. Displays raster data in a map or scene. A base class for renderers that can help visualize raster data. Sublayer source that is a file-based raster, residing in a registered raster workspace. A raster workspace. Contains the features that have been returned from a related tables query.

Contains the input parameters for a related tables query. Information about the relationship between two tables. An interface adopted by classes that access remote network resources that have the potential to be secured. Base class for renderers. Represents a rendering rule created from JSON or a pre-defined one on server.

Metadata about a rendering rule on the image service. Configuration parameters that apply to network requests.

Parameters used to perform automatic rerouting, if off-route while navigating a route. An attribute to be used as a restriction in the analysis. Parameters for reverse geocoding using a LocatorTask. A Route contains information about the best way to maneuver between a series of Stops. Parameters for a RouteTask , such as stops, barriers, and whether to return directions.

The result from a RouteTask. A task to find a route between two or more locations. Information about a RouteTask. Uses a location to provide status and progress updates as a route is traversed by a moving vehicle, for example. A location data source that uses a route tracker and a generic location data source to output locations snapped to a route. Filter features from the display based on the current map scale. A DisplayFilter that is applied on the layer based on the provided scale range.

A container class storing a list of scale range display filters. A scene which can be displayed on the screen by the scene view. A 3D scene implemented as a QGraphicWidget.

A 3D scene implemented as a QQuickItem component. The base class for a 3D scene. A segment represents an edge of a multipart geometry, connecting a start to an end point. Defines selection properties for the GeoView. Represents a service area facility. Represents input parameters for computing service area using ServiceAreaTask.

A single service area polygon. A single service area polyline. The results generated by a ServiceAreaTask after solving. A task to compute areas that can be serviced reached from a given location. Information about a ServiceAreaTask. Identification metadata about a service. A container for a collection of ServiceFeatureTable instances connected to a feature service. A base class for all image tiled layers that fetch map tiles from a remote service. Information about a time-aware map service.

An object that represents version metadata for a version in a branch-versioned feature service. The parameters used to create a new version in a branch-versioned feature service. A feature table created from a shapefile. Contains information about a shapefile. A shapefile workspace. A fill symbol based on simple patterns. A line symbol based on simple patterns.

A 3D marker symbol based on simple shapes. A marker symbol based on simple shapes. A simple renderer based on a single symbol. A location data source that provides simulated device locations for testing.

Parameters to control how locations are created from a simulated route of travel Polyline. The properties of the layer that contains sites for a floor-aware map or scene. Defines which edit capabilities of the SketchEditor will be enabled or disabled. A class that allows the user to sketch geometries on the map. SketchStyle allows the visual appearance of the SketchEditor to be configured.

A class that represents a vertex or mid-vertex in the SketchEditor. A solid fill symbol layer is a symbol layer intended for use with polygon geometries. A class for line symbol layers with customized geometric effects. Position of the source object a network element in the source network dataset. A spatial reference that defines how coordinates correspond to locations in the real world. A standard deviation stretch parameters object. Represents a type used for defining a statistic to be queried for in the table.

Represents a value within the StatisticRecordIterator. An iterator for a collection of statistic records. Contains parameters for a query for statistics. Contains the statistics that have been returned from a query. A location to stop along a Route. Base class for various Stretch parameters. A stretch renderer that can help visualize raster data using RasterLayer. A StrokeSymbolLayer represents a symbol layer that, when applied to a polyline geometry, draws a stroke along that geometry.

The StrokeSymbolLayer can also control drawing the outline of a polygon geometry. Information about the user’s subscription. A layer that can visualize feature data with different visibility, rendering, popup properties, and so on for some or all of the FeatureSubtype in an ArcGISFeatureTable. A sublayer that allows custom rendering for features of a particular subtype. A list model storing a list of subtype sublayers.

A list model storing a list of SuggestResult for a LocatorTask. Parameters for suggesting potential matches using a LocatorTask. The result class returned from a suggest operation of a LocatorTask. Class containing elevation sources. Base type for symbols used to display a graphic or a feature. Implements the anchor of a symbol layer, including placement mode and x and y anchor values.

Symbol layers are used to build Multilayer symbols. A list model storing a list of symbol layers available in a multi-layer symbol.

A list model storing a list of symbols. Symbol properties that change how symbols behave when attached to a renderer. Creates a new symbol style object using the registered style name of the Esri web style on the portal. Search parameters used to search for symbols in a SymbolStyle. A search result object returned by symbol style. The email may be in your junk or spam mail folder. Please email alumniprograms hbs. If you have never used Zoom before, you will be asked to download and install Zoom when you click on your link to join.

Your link is personalized to you. We ask that you do not share or post your link, as these programs are meant to be exclusive offerings for HBS alumni. Visit alumni.